All parameter lists are in your controller’s data sheet. You can view these via product quick search. For this purpose, simply enter the 9-digit part number in the search window and click on "Start search".
Parameter settings are changed specifically for the controller. The information is in your data sheet, which you can find via product quick search. For this purpose, simply enter the 9-digit part number in the search window and click on "Start search".
Press the controller test key for 5 seconds until you can see the "crossed out horn". This is normally above the key with the arrow pointing downwards.
To start defrosting, press the key with the defrost symbol for 5 seconds. This can usually be found on the key with the arrow pointing upwards.
To set the switching direction for a relay, read your specific data sheet. To do this, simply enter the 9-digit part number in the Product Quick Search window and click on "start searching".
Then contact us personally! Whether by email or by telephone - we will be pleased to make contact with you.